SunClad™ Sash Set Fixed Lite Operation

The SunClad™ Sash Set Fixed Lite is essentially the same as our Casement window, only without any operating hardware. The non-operating sash fills the whole frame opening of the window like the casement, but it is permanently mounted in the frame.

SunClad™ Extruded Aluminum Exterior

SunClad™ is the name we give our heavy-gauge extruded aluminum exterior on our clad-wood products. Aluminum is highly resistant to the effects of weather. It does not rust like other metal. It does not rot or decay, warp or distort like wood. It does not break down chemically over time like vinyl or fiberglass. Our heavy gauge extruded aluminum will not easily dent like Roll Form aluminum wrapped over a wood sash exterior. It provides exceptional strength and long life for the product and it is the perfect surface for our High Durability Powder Coat Finish.

• Superior Strength - for the frame and sash
• More Durable - protects interior wood components
• Protects the Home better
• Fail-Safe Water Management System - weeps water from frame and sash components
• Integral Nailing Fin - permanent fin is part of the frame
• High-Durability Powder Coat Factory Finish

Integral Nail Fin

SunClad™ products are designed with a rigid nail fin that is formed as an integral part of the exterior frame extrusion. This provides for a very strong and stable installation. The nail fin can be scored and removed for mulling and retro-fit applications.

Fail-Safe Water Management System

All SunClad products are designed with a Fail-Safe Water Management System. The exterior perimeter of the glass is sealed against water intrusion. However, because aluminum, glass and wood all expand and contract at different rates, we design our Fail-Safe Water Management System to provide an effective drain path (to the exterior) for water to exit the glazing channel and sash structure. This prevents water or moisture from becoming trapped within the sash, which helps protect the insulated glass against seal failure and the wood interior of the window against deterioration.

High Durability Powder Coat Finish

Sun uses high durability powder coating as the exterior finish of our SunClad products. It is tougher than conventional painted finishes. The powder is electrostatically applied to aluminum extrusions that have been washed and prepared in a multi-stage pre-treatment process. The applied powder is baked on to the extrusion which is ready for production shortly after leaving the oven. Our standard finish meets AAMA 2604 requirements and allows us to provide a 20 year warranty against peeling, flaking, blistering, cracking, checking and loss of adhesion and a 10 year warranty against chalking and color change. An optional AAMA 2605 finish is also available and offers a 30/15 year warranty respectively. Sun offers 11 Standard Colors, 26 Feature Colors, 15 Metallic Finishes and 6 Anodic Finishes. Additionally, virtually any color you want is available through Custom Color Matching. Sun's Powder Coating is also very environmentally friendly, with no VOCs and no lead or chromium in any of the processes.

Beautiful Wood Interior

SunClad products feature a beautiful, high-grade, clear Ponderosa pine interior that is suitable for staining or painting. All wood components are treated with a wood preservative for long life.

• Select Clear Ponderosa Pine - beautiful, high-grade
• Suitable for staining or painting
• Preservative Treated against insects and decay

Sun's Insulated Glass

All Sun products are glazed with Dual Glazed insulated glass. All of Sun's Hi-Performance Low-E Insulated Glass units are Argon filled and feature the Duralite™ warm-edge glass spacer system. Both dual glazed (using two pieces of glass) and triple glazed (using three pieces of glass) are available (depending on the product type). Tempered insulated glass units (both glass pieces) are standard on all door units. Sun manufactures these units in our own state-of-the-art insulated glass production facility, allowing us to produce the high quality insulated glass units for each order. This line is carefully monitored for quality control, glass testing and certification, to assure you that all Sun insulated glass is produced to the highest standards.

Duralite™ Warm-Edge Spacer System

All Sun insulated glass units use the Duralite™ warm-edge glass spacer system. Duralite is the only all non-metallic spacer system available. This gives superior thermal performance and its flexible properties provide a superior seal and excellent argon retention. It is one of the reasons we are able to provide a full 20 year warranty on our insulated glass.

Climate Matched Low-E Glass

Sun Windows offers Energy Saving Low-E glass that is matched to your climate. Select our Sun Advantage 270 Low-E glass if you are in a climate that has a mixture of both heating and cooling seasons. Sun Advantage 270 is a second generation Low-E glass that permits 70% of the sun's visible light while blocking 86% of harmful UV rays. Select Sun Advantage 366 Low-E glass if you are in a climate that has stronger cooling requirements. Sun Advantage 270 is a third generation Low-E glass that reduces the amount of the sun's visible light to 66% while blocking 95% of harmful UV rays. Both types use our Duralite™ Warm-Edge glass spacer and have air spaces that are Argon filled for an insulated glass unit that offers excellent thermal performance.

Reglazable Sash & Panels

All SunClad™ Wood products use interior wood glazing stops that allow for the reglazing of the sash or panel should the glass ever be damaged.

Air-Tight Construction

A combination of our product designs, the materials we use and our manufacturing processes produce windows with outstanding air-infiltration performance. Complete weather-stripping and secure sash closure provide and air-tight seal. Our product air-infiltration ratings out-pace the industry standards and many of our competitors.

Lead Times For Options

Since all Sun products are built to order, we offer a wide range of options for you to customize your windows and doors to meet your needs. Some of these options are part of the standard production flow while others are more specialized and may require additional time to produce. When a quote is created for your order, any extended lead times are indicated. This can assist you in planning your project and help you coordinate your workflow.

SunClad™ Fixed Lite Window Configurations

SunClad™ Fixed Lites are available as single units or in mulled units up to 5 units wide.

Any combination of operating and fixed units can be joined into a mulled unit. Example: you can order a 4 window unit with 2 operating casements on the ends and have 2 fixed unit in the middle. The individual units can be the same width or different widths. The main restriction is that the overall combined unit width cannot exceed 12' and the height cannot exceed 8'. Larger combinations may be mulled on site. Please note that mulled units are not designed to take the place of structural framing. In some instances it is better to order your units "aligned" but not mulled. This means that they will be built with the proper grille alignment to be installed beside or above each other, but the wall will have structural framing separating the units into smaller combinations or single units. More information on combination units is available under Mulls and Mulling.

SunClad™ Exterior Colors

Sun's High Durability Powder Coat Finish is available in 11 Standard Colors, 26 Feature Colors, 15 Metallic Finishes and 6 Anodic Finishes as well as in Custom Match Colors. You also have the option of using various color combinations to create a unique visual accent.

11 Standard Colors
Sun Windows "SunClad" products are now available in 11 standard colors. Our standard colors cover the most popular choices, are readily available and are all available at the standard price.
Colors: White, Vanilla, Beige, Sand, Bronze, Dark Bronze, Gray, Black, Sepia Brown, Red, Green.

Feature Colors and Metallic Finishes
Sun also offers 25 Feature colors, 15 Metallic finishes and 6 Anodic finishes. These special feature colors expand your options and offer greater possibilities for design accents. An additional fee, based on the color selected, is charged for these finishes. Color cards available upon request.

Custom Match Colors
Virtually, any color you want is available through our color matching feature. Give us a color sample to match or even an RAL* number and we will produce your windows in your own custom color. Additional fee applies.

Multi-Color Combinations
In addition to having your choice of almost any exterior you can think of, you can now choose to create custom, multi-colored combinations. As an example you may select to have the product sash in one color, the grilles in another and the frame (and or) brick mold trim in yet another color. By combining different colors with different options you can create unique exterior accents to give your home that extra-special touch.

Note: Due to the variations in color representation on computer monitors, the colors shown are for general reference only. For accurate color selection and matching, please obtain a color chart or sample swatch from your Sun Window Dealer or Representative.

SunClad™ Exterior Trim & Accessories

An exterior trim system is available on SunClad™ products to enhance the visual appeal of the window and increase the accent they add to the home's exterior. This system includes various SunClad™ aluminum extrusions that can be used by themselves are in combination to form exterior trim (or casing) accents or as exterior mulls and expansion mulls. The profiles include a Traditional Brick Mold, Georgian Brick Mold, 3-1/2" Flat Casing, various mulls and expansion mulls, as well as 30° and 45° angle mulls. Select this link to view the profiles . . . SunClad™ Trim & Accessories - Profile Drawings.

All of the extrusions are powder coated to coordinate with the SunClad windows and doors to which they are applied. They can be the same color or in any accent color you select.

Interior Wood Finishes & Options

The wood interior of all SunClad™ products is available in the following finish options.

• No Finish
• Clear Poly Finish
• White Painted Finish (see paint code for matching)
• Custom Painted or Stained (customer to supply finish number or sample to match)

All SunClad™ products feature Clear Ponderosa Pine. Optional wood species are available by custom quote. Contact your Sun Representative or Sun Customer Service.

Sun Interior White Paint Code:

Kelley Technical Code = PN#TD12006/5G

Sherwin Williams B20W51 PROCL LTX SA Extra
Custom Sher-Color Match
BAC Blend-A-Color 64oz / Y1 Yellow

Glazing Method

All Sun products are glazed with Dual Glazed insulated glass. Our Casement family products as well as our Fixed Lite products are also available with Triple Glazed insulated glass.

Glass Types

Most building codes now require thermally efficient insulated glass in windows and doors. Therefore, high-performance Low-E glass has become an industry standard. Sun offers a range of Low-E Insulated Glass units to match maximum thermal benefits with your region.

• ClimaGuard 63/31 is for regions that have both heating and cooling seasons.
• ClimaGuard 55/27 is for regions that require mostly cooling.
• Energy Advantage 63/31 and 55/27 add an additional Low-E surface to the their respective units for even higher thermal performance with the caveat that interior glass is coated and requires specials care when cleaning.
• Clear glass is available for specific applications where energy performance codes do not apply.

Glass Tints

All insulated glass units can be tinted. Tints available are: Bronze, Gray, and Reflective Tinted Glass. Tints are part of the glass, not a film. Never apply glass films to Sun insulated glass units.

Obscure Glass

All insulated glass units can include Obscure glass. Available Obscure textures are: Typical Obscure (P516) and Niagara Obscure (vertical waterfall pattern).

Tempered Glass

Most insulated glass units can be Tempered to meet glass requirements. Both pieces of the insulated glass unit are tempered. Most glass options (Low-E, Tints, Obscure) are available in tempered glass units.

Decorative Glass

Sun offers decorative glass. Various custom patterns are available. Contact the factory for more information.

• Fleur De Helios Pattern (shown) - stocked for 48" x 48" Fixed Lite
• Additional Pattern and Type available by custom quote

Grille Types

SDL
SDL or Simulated Divided Lite, is an aluminum grille bar permanently applied to the exterior glass surface and a wood grille permanently applied to the interior glass surface. A black shadow bar is sealed between the glass. This simulates old divided lite windows without sacrificing the benefits of a single insulated glass unit. Available in 5/8", 1" , 1-1/4" and 2-1/4" (simulated mull) wide profiles.

SCR
Simulated Check Rail is a variation of our SDL using a wide 2-1/4" bar horizontally across a Casement or Fixed Lite window to simulate the look of a Double Hung window.

SM
Simulated Mull is another variation of our SDL using a wide 2-1/4" bar vertically. One or two of these can be placed in the center of a wide Casement or Fixed Lite to simulate the look of two windows joined together or two sashes side by side.

Wood Grille (Push-Pin style)
This removable wood grille mounts to the window interior. Grille clips with push-pin points slide in notches at the end of each grille bar to fasten the grille to the window. Removing the grille makes it easier to clean the glass. Wood grilles are available in 1" and 1-1/4" wide profiles.

Wood Grille (Surround style)
Also available is a wood surround grille that has wood frame around the perimeter of the grille. This inserts into the daylight opening of the sash and is held in place by an anchor pin.

GBG
GBG (Grilles Between Glass) are 3/4" contoured profiled aluminum grilles sealed within the insulated glass unit for no-maintenance convenience. Available in White, Vanilla, Beige, Sand, Bronze, Black, Green and Red colors. They are also available in two color combinations (one color facing the interior the other facing the exterior) of White/Sand and White/Bronze.

Grille Colors

SDL Colors
All SDL options and variations are available using any of our SunClad™ Exterior Color options for the exterior grille bar. The interior wood grille can be finished using any of our interior finish options. The shadow bar is black.

Wood Grille Finish Options
Wood Grilles are available with any of our Interior Wood Finish Options: No Finish, Clear Poly, White Painted, or Custom Painted or Stained.

GBG Colors
Available in White, Vanilla, Beige, Sand, Bronze, Black, Green and Red colors. They are also available in two color combinations (one color facing the interior the other facing the exterior) of White/Sand and White/Bronze.

Grille Patterns

Sun's Grille systems (see grille types) are available in a various standard Grille Patterns or in custom designed patterns. View our Grille Pattern charts to see illustrations of our standard patterns. If you have a custom pattern, please submit a drawing to us and we will provide you a quote for your project. Please note that not all patterns are available in all grille types and sizes. Manufacturing limitations apply.

Jamb Depth & Extension Options

All SunClad™ products have a standard jamb depth of 4-9/16" (unless noted otherwise). For deeper wall construction, single piece extensions can be added to the jamb up to a total jamb depth of 6-9/16". These extensions are applied at the factory.

Note: Jamb Extensions are available in 1/8" increments up to 7-9/16" total jamb depth. Extensions over 6-9/16" are achieved by stacking a 2" piece plus an additional piece up to 7-9/16" total jamb depth. See our Jamb Extensions page for more details.

Additional Casement Jamb Options

Step Jamb - For trim alignment with other non-casement family products. Adjusts the trim offset on casement family products to line up with other SunClad™ products.

No Jamb - Casement family products can be built without the interior wood jamb for retro-fit applications where the product is used as an insert window.

Blinds Between The Glass

Many SunClad Casements, Fixed Lites and Doors are available with Blinds between the glass. Sun offers three different blind systems, each with it own benefits and limitations. In general, blinds between the glass offer the privacy and adjustable daylight control that typical add-on blinds provide with additional benefit of minimal exposure of the blinds to the indoor environment. This can help protect your blinds from dust and handling damage. However, when blinds are placed between the glass, you loose the ability to have a grille system and interior screens (on casement windows) must be removed to operate the blinds.

A) Raise & Lower Sealed IG Blinds
A Blind system that is sealed within the insulated glass unit. This is a raise and lower blind that is opened (tilt the blind slats) by a magnetic operator located at the top of the glass. A side mounted operator raises and lowers the blind. Available on SunClad™ Casement and Fixed Lite windows and on SunClad™ Doors.

Slat Color = White
Tilt Operator Color = White
Raise/Lower Operator Color = White

B) Tilt Only Sealed IG Blinds
Also available is a variation of our sealed IG Blind system that tilts only. A magnetic operator located at the top of the glass opens (tilts) the blind slats. Available on SunClad™ Casement and Fixed Lite windows and on SunClad™ Doors.

Slat Colors = White, Alabaster, Sand, Gold
Tilt Operator Color = White

C) Tilt Blinds with Removeable Glass Panel
SunClad™ Casements and Fixed Lites offer the option of an aluminum blind system that is housed between the insulated glass unit and a removable interior glass panel. This protects the blinds from dust and damage from being handled. A magnetic operator, located on the removable glass panel, activates the blinds. Screens may be used with the blind system. Simply remove the screens to adjust the blinds Blind colors are white, alabaster, and sand. Glass panel frame colors are white or sand. Blind operator color is white.
Note: glass panel is tempered when the window has tempered insulated glass.

Slat Colors = White, Alabaster, Sand, Gold
Tilt Operator Color = White
Removeable Glass Panel Frame Colors = White, Sand

Notes:
1. No grilles are available when Blinds are used
2. No ClimaGuard Low-E or SPF gkass is available on types A & B
3. Energy Advantage Low-E glass is available on types A & B
4. Screens must be removed to operate the blinds

Mulls & Mulling

Product Combinations
SunClad™ products can be combined with companion products to form special feature windows or window and door combinations. SunClad™ products are designed so that they can be easily grouped together to form multi-unit configurations. These configurations can be as simple as combining two units together, side by side, to form a 2-wide unit, or as complex as combining multiple units of various styles and shapes to form a special feature window wall. Send us your ideas and we will help you configure your special combination.

Mulled Unit Dimensions
When mulling SunClad products together, the over-all unit size can be determined by adding the product unit sizes together. For combinations of 3 units or more, an incidental gain may occur. Increase the Rough Opening dimension by 1/8" for 3 units or 3/16" for four units.

Mulled Unit Restrictions
The maximum over-all size for a factory mulled unit cannot exceed 12' by 8' (vertical or horizontal).
Maximum units wide = 5
Maximum units high = 4
Maximum Door Mulled Unit = 6-0 x 6-8 with Call Height 12 Transom
No units can be mulled to the sides of True French Doors. Use separate framing.

Exterior Mull Covers
Exterior Mull Covers for mulling windows on the job site. Include exterior mull cover only. (Installation is not provided).

Product Dimensions

Sun's Product Dimension Sheets chart various dimensional characteristics of our products. These include the Unit Width & Height, Rough Opening Width & Height, Daylight Opening Width, Height & Square Feet, Clear Opening Width, Height & Square Feet, as well as additional Clear Opening dimensions for alternate hardware and sash removed. Select the Dimension Sheet for the product you are interested in to view the details.

Energy Performance

Energy Performance is reported as a group of values designated the National Fenestration Ratings Council (NFRC) to provide meaningful, comparative data for windows, doors and skylights. The NFRC has determined that these values represent the key energy performance factors when measured and reported in a standardized method.

These values are:
• U-Value
• Solar Heat Gain Coefficient (SHGC)
• Visible Light Transmittance (VLT)
• Condensation Resistance (CR)
• Air Leakage or Air Infiltration

U-values and Solar Heat Gain Coefficient are used by the EnergyStar™ Certification Program to rate windows and door products as Energy Efficient. Additional factors, especially the Air Leakage or Air Infiltration rating, are critical in the overall, actual energy peformance of the installed product.

For additional information see:

NFRC
EnergyStar

Design Pressure, Air, Water & Structural Performance

Physical Testing and Certification of the design performance of windows and doors is done to meet code and specification requirements. The products are tested and rated in accordance to 101/I.S.2/A440-08 Standard for Windows, Doors and Skylights. They are tested and rated for the following:

• Design Pressure
• Air Infiltration
• Water Performance
• Structural Test Pressure

Specifications

Specification sheets provide the critical information needed to satisfy code and specification requirements for projects. They outline all the various aspects of the windows and doors and aid the specifier in determining the compatibility of the product for its use in the project.

Section Detail Drawings

Section Detail Drawings are available to assist the designer or specifier when integrating Sun products into their projects. These drawings provide basic sectional views and dimensions for our products.

High Durability Powder Coat Finish

Sun uses high durability powder coating as the exterior finish of our SunClad products. It is tougher than conventional painted finishes. The powder is electrostatically applied to aluminum extrusions that have been washed and prepared in a multi-stage pre-treatment process. The applied powder is baked on to the extrusion which is ready for production shortly after leaving the oven. Our standard finish meets AAMA 2604 requirements and allows us to provide a 20 year warranty against peeling, flaking, blistering, cracking, checking and loss of adhesion and a 10 year warranty against chalking and color change. An optional AAMA 2605 finish is also available and offers a 30/15 year warranty respectively. Sun offers 11 Standard Colors, 26 Feature Colors, 15 Metallic Finishes and 6 Anodic Finishes. Additionally, virtually any color you want is available through Custom Color Matching. Sun's Powder Coating is also very environmentally friendly, with no VOCs and no lead or chromium in any of the processes.

UV Fade Protection

Put an end to the fading of your carpets, floors, drapes, and interior furnishings from the daylight coming through your windows. Sun products provide the ultimate in UV Fade Protection with the use of our optional ClimaGuard SPF™ glass. ClimaGuard SPF™ glass blocks 99.9% of all UV rays.

Understanding and Controlling Condensation

This article describes the basic causes of condensation and provides some tips to help control its occurrence.

Certifications & more

Sun Windows participates in various certification and testing programs to validate our product designs, components, and manufacturing processes. These certifications help establish how well-qualified our products are for our customers' applications. Additionally, Sun is active in other programs and efforts that help enhance environmental stewardship and the promotion of environmentally friendly products.

Instructions

Download these PDF formatted sheets for detailed instructions.